The Haphazard Blog

How I Obtained My PMP for Less Than $1,000 in 3 Months

by on June 30, 2017 4:43 PM, under Business, Project Management

I’ve been resistant to obtaining a PMP (Project Management Professional) for a few years. My company had been on a kick to get all Project/Program Managers certified for a short time, but then backed off of it. I didn’t get any feedback from anyone who obtained one commenting on the value, nor was there much encouragement to get one.

I decided to pursue one because it is a globally recognized certification and confirms my experience and knowledge in project management. With that decision made, I had to decide how to go about it. My colleagues mostly attended week long courses or online courses. The budget for training has gone down and there weren’t any of those courses nearby, so I looked into other options.

I settled on a plan that utilized:

Note: I am not being paid by anyone for this. I’m sharing what I used and what worked for me. Prices are retail and add up to $1,054, but some stuff you can buy bundled or obtain for less than retail.

With the overall plan in place, I started at the end of March. My plan was pretty straight forward:

  1. I was going to go through the major sections by first watching the PrepCast, Read the corresponding part of the PMBOK Guide followed by the corresponding part of the Exam Prep
  2. Take the “Final Exam” to get 35 PDUs
  3. Apply for the PMP
  4. Begin taking practice exams and study more
  5. Take the exam

I pretty much stuck to that plan. I spent about 3 hours a week night doing that and 3-6 hours per day on the weekend. I’d take a day off when I felt I needed it. I tried to break up the studying at good stopping points (watch the videos, read the PMBOK Guide, read the Exam Prep) so nothing would be split up. So some nights that meant 2-2.5 hours, others 3.5 hours. Initially, I thought I had about 56 hours of video to watch and 1,200 pages to read (at my slow 1 page a minute, another 20 hours). I soon learned that it would take about 2x longer to get through all of step 1 above.

PM PrepCast: I found it quite helpful in learning. I played it back at 1.5x speed though because the instructor speaks very deliberately and I found I was not paying as much attention. The faster speed helped with that.

One thing I would do differently is they recommend skipping the section on Project Integration Management and doing it after covering the other 9 knowledge areas. I constantly felt like I was missing some key information that would’ve been helpful to know, particularly relating to Monitoring & Controlling/Change Control. I would cover that section in the normal order and them watch it a second time after finishing the other 9 areas.

I also did not take the 110 question self-assessment first. I’m not sure what I had to gain from doing that. I knew I needed to learn the material. What help is there knowing I know X% of the material in which I’m not at all familiar. Instead I watched all the section overviews to at least understand the processes/material and then took the assessment. I ended up with ~65% after that. I felt pretty good knowing that was my starting point just between my experience and watching the overviews. (A long time ago, before they switched scoring methods, a passing score was in the low 60%.)

PMBOK Guide: First a PSA. I use a password manager so my passwords are always random. When you download anything non-public from the PMI website, it is an encrypted PDF and it will use your PMI password. I realized this after I downloaded the PMBOK Guide, 6 Practice Guides and 7 Practice Standards. I had to keep looking up my password to open the documents. Set your password to something you will want to use to open those documents, even if it is temporarily.

I ended up reading this cover-to-cover. It seems like a lot of people who take and pass the exam do not. I found it to be a good complement to the videos as it was just another way to learn the material. It either filled in gaps or reinforced what I already watched.

PMP Exam Prep: I think this was a real good prep book. Very good explanations and exercises throughout. Just another perspective and view on the PMBOK Guide.

After this, I took the final exam to get my 35 PDUs so I could apply for the PMP.

PMP Application: This is an area that concerns a lot of people. I’m not exactly sure why however. Some are worried about being audited. Other say it takes 40 hours to complete. I don’t think mine took more than 3 or 4 hours. It’s your education, PDUs and experience pretty much.

For the experience part, a co-worker gave me a spreadsheet to help. It’s something most people can make: a few cells calculated hours based on percentages. But essentially, you should know for each project you plan to submit, the calendar months that you worked on it (not just a general duration) and the amount of time you spent working on it in the 5 process groups. By this point, you should know all of the processes that are in each process group so you can easily estimate the amount of time you spent in those areas. You are not required to have spent time in all areas on every project, but between all your projects, you should have experience/hours in all of the process groups. Also, it’s not clear why PMI fails to provide the following on the application, but they send it to people when their application is rejected to help them provide enough information for PMI to verify experience. Use this format and make it easy on you and the reviewer (you only get 550 characters, be concise!).

  • A brief, one-sentence project objective
  • Project deliverables summarized by process areas (Initiating, Planning, Executing, Monitoring and Controlling, and Closing – abbreviations are acceptable IN, PL, EX, MC & CL)
  • A brief, one-sentence project outcome

That will also help you figure out how much time you spent in each process group on the project.

Finally, a couple more tips are submit the projects with the most hours/non-overlapping calendar months first. They will stop accepting project experience once you meet the thresholds, so enter as few as needed to meet them. Before you submit your application, verify with the person you listed on your application that they would confirm everything you wrote (your title/role, description, dates and hours) if they were asked to by the PMI. If you get a random audit, you won’t have any worries, it will just slow down how soon you can apply to take the exam. (I was not audited.)

One personal note to add here is the PMI requires that those who may need accommodations due to disability, must apply for them before they can schedule the exam. I contacted them to see what the process was and it’s not simple. I’d say it’s onerous. They require documentation and a letter from professionals. If you have those needs but are managing your disability without constant medical/professional interactions, you will need to go see a professional. I visited the testing center to get a better idea of the environment. I also took some full practice exams to get a better feel for the experience. I am not sure what I could recommend to others. I had some concerns in general if the exam required a lot of writing or having to use a standard mouse over a trackball/touchpad. This exam has no breaks, so also sitting there comfortably for 4 hours was a concern. I was tempted to request it because my greater fear was realizing I actually needed it after the fact, so better to have it and not need it than not have it when you needed it. I also didn’t want pride to stop me from requesting something I needed. Perhaps that’s why the process is purposely onerous. In the end, I felt pretty good I would be okay without any (and it turned out I was).

Other Materials: I also made sure I read the PMI Code of Ethics (more on this in another post) and the Exam Content Outline.

PM Formulas: This was a good thing to have because it isolated the portions that involved formulas and gave you 100+ sample questions to take. I did this after I finished all of the above.

The PMP Exam prep book also recommended doing the sample questions at the end, instead of after each section. I did that at this point as well. I think there was nearly 400 questions.

PM Exam Simulator: With all the other stuff done, I started taking full practice exams. I scored a 91% on my first one. I reviewed all the questions and started a Word document to record areas I needed to review. I think it’s important to review all answers and not just the wrong answers because you may get some right that you were unsure of, so you still want to review those areas as well.

There was a question that came from a PMI Practice Standard so I skimmed all of those to read the major sections. ¬†Overall, as I took a couple more, I couldn’t improve my score. It seemed like ~90% was where I was at. I noticed I was missing a few explicit ITTO (inputs, tools, techniques, outputs) questions so I thought I should try and memorize them. I had made a spreadsheet that broke down each knowledge area and process to show the ITTOs and other sheets that showed the data differently (by input, tool and technique, and output). So for those keeping count, there are 47 processes, 64 unique inputs (used 255 times), 119 unique tools and techniques (used 209 times), and 66 unique outputs (used 153 times) to memorize. It’s just not for me. My brain honestly shuts down. I start to yawn and doze off trying to memorize it. Anything I find tedious like that, where you can just look up and answer in the real world I never do. I just don’t know what the point is to memorize so much information that is readily accessible. There’s just no value. With that, I accepted that I’d likely miss a few questions where I couldn’t logically determine the ITTO.

I took one last exam hoping to hit 95%. I wanted to get “Proficient” in all of the domains on top of passing. It doesn’t mean much at a high level, we’re all PMP certified and they don’t list the exam results in the registry. I don’t do things half way. I’m putting in maximum effort and always take pride in my effort and work. The last exam was 90.5%. Looks like my knowledge was stuck at ~90% no matter how much more I studied.

Hot Topics Flash Cards: I didn’t get to these until the very end. My test was on Wednesday and I looked at them for the first time on Sunday. I knew almost all of them in my first pass, over 95%. I decided I’d flip through one more time on Tuesday. There were one or two I didn’t know at that point so I memorized those.

Exam day was pretty straight forward. I called the day before and they said they opened at 7 and if I came early I could start early. I was checked in easily and got started. My only complaint is I wore layers, including a hoodie. When the AC kicked in around the 2.5 hour mark it was blowing right on my face and I was shivering after a few minutes. I put my hood up and after a little bit one of the monitors came in and told me I have to put it down because they need to be able to see my face. They have a list of prohibited items and a hoodie is not on it.

I made it through 60 questions in the first hour. In the next hour I made it through almost 50. I felt like I was marking too many for review and re-reading the question too much. I knew I needed to go faster. I don’t know if I focused more or if the questions were easier, but I finished with 45-50 minutes left. I had about 35 questions marked for review. I went through those and ended the exam with about 15 minutes left.

Before I get to the final results, a few tips:

  • If your goal is 5 Proficients, I realized that there are only 26 questions for Initiating and 14 questions for Closing. Getting a smaller number wrong here could knock you out of that compared to the other areas, so really study those, it’s only 4 processes. (This seems obvious in retrospect, but it just didn’t occur to me until after my 3rd or 4th practice exam.)
  • There are a lot of exam tips (including mine) and I ignored most of them. I didn’t read the last line first on long questions. I didn’t read the answers first. I didn’t skip questions that were taking too long. I decided I was going to read the question and answer it no matter what and mark any where I thought it could be more than one answer.
  • The strike-through answer feature is invaluable. I could typically eliminate 2 answers as wrong. Get those out of sight so if you go back, you don’t even bother with them. On questions where you have to figure out what’s best or what to do first, you can cross out answers until you have one left.
  • While taking practice exams, I sometimes talked myself out of the right answer I had initially selected. This exam is different from others I have taken. I felt I sometimes read too much into the question or made assumptions I should not have in trying to decide which of 2 answers was right. I decided I was sticking with my initial choice unless I had an explanation for exactly why the other choice was better. I ended up changing only a few answers either because re-reading the question I realized some new information I missed or because I had a legitimate reason why the other answer was better.

I was confident. I knew I passed and was ready for any combination or Proficient and Moderately Proficient. There were too many unknowns. I had marked 1/6 of the questions, which was mostly inline with my practice exams. Only 175 of the 200 questions were actually scored for the final result. There was one question I had no clue about. Plus the aforementioned Initiating/Closing margins. After the survey I was presented with a Passing result and Proficient in all 5 domains! I crushed it.

I think I probably spent 200-240 hours studying/preparing for the exam over the 3 months. I think I learned a lot and I found the whole experience valuable. I think another benefit was my CMMI experience. I was heavily involved in getting our company’s CMMI Level 3 certification renewed a few years ago and I also implement those practices on my projects. I was able to relate some of the PMBOK guide processes to many of the things I already do on my projects.

:, , ,

Leave a Reply